Laboratory Crusher & Pulverizer

Laboratory Jaw Crusher

Small, rugged jaw crusher ideal for preparation of rock samples for chemical or other analysis in the laboratory. It has a feed opening of 2" x 2", with a maximum recommended feed size of approximately 1". Discharge size is adjustable to a minimum of approximately 1/8". Crusher throughput is approximately 1/4 lb. per minute for 1/8" product. Jaws and cheek plates are made from 90% alumina which are non-contaminating, non-porous, easy to clean, and will not become impregnated with sample material.

Jaw plates of tungsten carbide can be supplied on special order (not interchangeable with ceramic jaws). Jaw frame is heavy welded steel to prove rigid support and years of hard use. Bearings are heavy duty, sealed, and oil lubricated for long, trouble-free life. Powered by 1/4 hp 115 V motor. Comes with stainless steel sample tray. Weight of crusher, motor, and base: 40 lbs.

U.S. Domestic Prices

PE-150   Jaw Crusher, Ceramic (90% Alumina).....................$1,990.00
PE-150TC Jaw Crusher, Tungsten Carbide..........................$2,510.00

010A-023 Replacement Alumina Jaws & Cheek Plates, Set...........$  565.00

010A-024 Replacement Tungsten Carbide Jaws & Cheek Plates, Set..$1,080.00

Laboratory Pulverizer Companion pulverizer to the laboratory jaw crusher for taking material from a maximum of approximately 1/4" size to a fineness of 40 to 200 mesh. Designed especially for preparing samples of approximately one to twenty grams prior to analysis. It has a feed opening of 3/8" diameter, ceramic or tungsten carbide plates, and is easy to use, easy to clean, and has a quick action closure. Direction of rotation of the pulverizer can be reversed for equalized wear and increased plate life. Pulverized material drops directly into sample envelope or container with very little sample loss. Powered by 1/3 hp 115V motor.

U.S. Domestic Prices

PE-100   Pulverizer, Ceramic......................................$1,625.00
PE-100TC Pulverizer, Carbide......................................$2,190.00

010F-032 Replacement Alumina Pulverizer Plates (set of 2).........$  235.00
010F-033 Replacement Carbide Pulverizer Plates (set of 2).........$  845.00

Return to: ASC Scientific Home Page

ASC Scientific
2075 Corte del Nogal, Suite T, Carlsbad, CA  USA 92011 - Tel. (800) 272-4327 - Fax.  (760) 431-0904