The MS3 is a compact, portable, lightweight meter, with a measuring range of 26SI, which operates with all MS2 sensors. It is completely software controlled via a USB connection to a compatible PC, laptop or PDA. The Bartsoft software supplied with the unit gives the user control over the measurement protocol and speed, and includes options to display data in both chart and table formats. A version of the software operating on Windows™ CE makes this meter adaptable for field applications.
The MS2 is a portable meter for operation with all MS2 sensors. Readings are displayed via an integral four-digit display. Its internal batteries are rechargeable from the mains or a vehicle charging point, with indicators for battery status and charging. The serial connection can be used for acquisition of data, and a range switch allows the user to select high or low resolution. All sockets and switches are environmentally sealed for outdoor use.
A wide range of laboratory sensors enables a user to carry out measurements at two distinct frequencies (MS2B) on soil, powders or liquids, on cores (MS2C) or split-cores (MS2E), or on small volumes samples (MS2G). A temperature / susceptibility system is also available.
A range of field sensors are available for mapping of outcrops (MS2K), surface mapping (MS2F or MS2D used in conjunction with the MS2 probe handle), or downhole measurements (MS2H).
- Environmental magnetism
- Archaeological and forensics surveys
- Core permeability studies and drilling fluid measurements (Oil & Gas exploration)
- Quality control of industrial processes
- Magnetic inks analysis
- Magnetic nanoparticles studies
- Wide range of laboratory, field and downhole sensors
- Sensors fully interchangeable with no adjustment required
- Resolution to 2×10-6 SI
- Range 0.1 SI (MS2) or 26 SI (MS3)
- Measurement period down to 0.1s (MS3)
|MS2B||36mm I.D. Sample Sensor – Accepts standard 1″ diameter paleomagnetic cores, 1″ cubic boxes and 10 ml cylindrical bottles.|
|MS2C||Core Logging Sensor – For whole core analysis, available with internal diameters of 30, 36, 40, 45, 47, 50, 60, 70, 72, 80, 85, 90, 93, 100, 110, 120, 125, 130, 135, 140, 145, 146, 150, 160 or 162 mm.
Information on Manual and Core Tracks for use with the MS2C sensor
|MS2D||Field Search Loop – Designed for rapid assessment of ferrimagnetic minerals in the top 100 mm (approximately) of the land surface.|
|MS2E||High Resolution Surface Sensor – For high resolution scanning of the surface of split cores.|
|MS2F||Miniature Field Surface Probe – Designed for soil surface measurements.|
|MS2G||Small Sample Sensor – Designed for measurement of 1 ml powder or liquid samples.|
|MS2H||Down Hole Probe – For sub-surface profiling of strata in 25mm nominal diameter auger holes|
|MS2K||Surface Sensor – Designed for stratigraphic study of exposed geological and archaeological sections|