0

Cart

Three-Axis Helmholtz Coils

Three-Axis Helmholtz Coils

Helmholtz Coils

Three-Axis Helmholtz Coils of 300, 600 and 1300 mm diameters and 2 m cube

ASC Scientific offers Ferronato® Three-Axis Helmholtz Coils for generation of homogenous magnetic fields for a wide variety of applications in the fields of sensor, satellite, automotive and consumer electronic  design and magnetics research.  Available coils range from 300mm diameter to 2m cube, with designs for generation of DC or AC fields up to about 300 hKz.  Accessories including DUT stands, magnetic mapping apparatus, coil supporting stands and elevated flooring are also available.

BH300-3-A
Datasheet BH300-3-B
Datasheet
Three axes coil sets with 300 mm nominal diameter, for laboratory and general uses. It can be also supplied in versions of one or two axes.  BH300-3-A is designed for laboratory and general uses.  BH300HF-3-B is designed to operate at high frequencies up to about 300 kHz.
BH600-3-B
Datasheet
Three axes coil set with 600 mm nominal diameter, for laboratory and general uses.  It can be also supplied in versions of one or two axes.
BH1300-3-A
Datasheet
BH1300-3-C
Datasheet
Three axes coil set with 1300 mm nominal diameter, for laboratory and general uses. It can be also supplied in versions of one or two axes.BH1300-3-A for DC or AC studies BH1300-3-C optimized for AC studies
BHC2000-3-A
BHC2000-3B
Datasheet
Three axes square with 2 meter dimensions BHC2000-3-A:  heavy windings for relatively high magnetic fields up to 1 mT
BHC2000-3-B:  lighter winding well suited for canceling the earth’s local field

To place an order or for more information on this product please fill out the form below.

Accessories

PBH1300-P/R-1

Supporting stand for BH1300-xx. Places the coil-set at a comfortable height and also reduces the distorting effect due to magnetic material located under the floor surface. Can also be supplied for Helmholtz Coils of other dimensions.
Datasheet

Stands for DUT
Stands for Device Under Test, for standard and special coil-sets
BH1300 DUT Stand Datasheet

BH300 DUT Stand Datasheet

ULTAS-1

Simulation of rotation in microgravity
Frictionless, non-magnetic, rotating stand for device under test, especially for picosatellites.
Datasheet

Stands for 3D magnetic mapping

These allow placement of a probe in the X/Y/Z space with a precision of ±1 mm, for the study of the magnetic field homogeneity.
Design is adaptable to different coil dimensions.