Magnetic Shield Assembly and Degaussers
ASC Model S-6 Shield Assembly
The S-6 shield assembly consists of six cylindrical magnetic shielding layers which can provide an ultra-low magnetic field space for sample storage or other experiments where a low field environment is required. The six layers are constructed of 0.025″ AD-MU 80 alloy and are concentrically nested using foam rubber spacers. The entire assembly is supported on a laminate covered base. Listed performance specifications are based on on-site degaussing. Both the D-5 and D-2 degaussing accessories shown below are effective in degaussing the S-6 shield assembly.
|Shield Dimensions:||Inner – 6 1/8″ x 21 1/8″ long
Outer – 10 1/16″ x 23 1/4″ long
|Overall Dimensions Including Base:||12″ wide x 24″ long x 12″ high|
|Working Volume for 1nT or less Field:||5″ dia. x 6″ long|
|Working Volume for 10nT or less Field:||5″ dia. x 12″ long|
To place an order or for more information on this product please fill out the form below.
ASC Model D-5 Degaussing Wand
The D-5 degaussing wand is designed for demagnetizing shields such as the S-6, or any shield with an inside diameter of at least 5 inches. The unit has an adjustable output level and is available in two versions: 110/120 VAC and 220/240 VAC.
ASC Model D-2 Degaussing Wand
The D-5 degaussing wand is designed for similar applications as the D-5, but can be used on shields as small as 2 inches inside diameter. The unit requires a user supplied 15 VAC power source such as a Variac or other AC power supply.